Konica Minolta eCopy User Manual

Page 161

eCopy ShareScan OP Installation and Setup Guide | 153

Select the connector profiles that you want to publish and click

In the

Create Profile

window, select additional connector profiles that you want to publish. You

can publish up to nine connector profiles to any device.

When you have finished selecting the connector profiles to include in the group, click

. The

new group of profiles is listed in the

Publish Connector Profiles

window.

To add target devices:

In the

Publish Connector Profiles

window, click

Manage

> If the device that you want to add is not on the list, click

Add Devices

and go to step 2.

> If the device that you want to add is on the list, select its check box and click

Done

In the

Select Devices

window, select the device type, ScanStation or Embedded. If you select

ScanStation

, the list of available devices displays the available ScanStations. If you select

Embedded

, the list displays the available Services Managers.

Note:

Although Copy is not supported on ScanStation devices and Fax via Print is not supported
on devices with embedded clients, the software does not keep you from selecting them.
This is because the software does not know what devices will use the group of profiles
you are creating.