Allied Telesis AT-S63 - Manual (Page 671)

AT-S63 Management Software Menus Interface User’s Guide
671
Basic Switch Default Settings
This section lists the default settings for basic switch parameters. The
following topics are covered:
❑ ”Boot Configuration File Default Setting” on page 671
❑ ”Management Access Default Settings” on page 671
❑ ”Management Interface Default Settings” on page 671
❑ ”RJ-45 Serial Terminal Port Default Settings” on page 672
❑ ”SNTP Default Settings” on page 672
❑ ”Switch Administration Default Settings” on page 673
❑ ”System Software Default Settings” on page 673
Boot
Configuration
File Default
Setting
The following table lists the File menu default setting.
Management
Access Default
Settings
The following table lists the management access default settings.
Management
Interface
Default Settings
The following table lists the management interface default settings.
File Menu Setting Default
Default Configuration File boot.cfg
Remote Management Access Setting Default
Telnet Enabled
SNMP Disabled
TFTP Enabled
Web Server Enabled
Management Interface Setting Default
Manager Login Name manager
Manager Password friend
Operator Login Name operator
Operator Password operator