Allied Telesis AT-S63 - Manual (Page 197)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 197
❑ If you are using TFTP, you should start the TFTP server before you
begin the download procedure.
Downloading a
System File
from a Local
Management
Session
To download a system file onto a switch from a local management
session using Xmodem or TFTP, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 51.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 58.
3. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 52 on page
187.
4. From the Downloads and Uploads menu, type 3 to select Download a
File.
The following prompt is displayed:
Download Method/Protocol [X-Xmodem, T-TFTP]:
5. To download a system file using Xmodem, go to Step 7. To download
a file using TFTP, do the following:
a. Type T.
The following prompt is displayed:
TFTP Server IP address:
b. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
c. Enter the directory path and file name of the system file on the
TFTP server to be downloaded to the switch. You can specify
only one system file.
The following prompt is displayed:
Local File Name:
d. Enter a name for the system file. This is the name that the
switch will store the file as in its file system.
The following message is displayed: