Allied Telesis AT-S63 - Manual (Page 596)

Chapter 27: PKI Certificates and SSL
596 Section IV: Security
Viewing a Certificate
This procedure displays information about a certificate, such as its
distinguished name and serial number.
This procedure starts from the X509 Certificate Management menu. If
you are unsure how to access the menu, perform steps 1 to 4 in the
procedure ”Adding a Certificate to the Database” on page 588.
To view the details of a certificate, perform the following procedure:
1. From the Main Menu, type 8 to select Security Configuration.
The Security Configuration menu is shown in Figure 175 on page
559.
2. From the Security Configuration menu, type 3 to select
Keys/Certificates Configuration.
The Keys/Certificates Configuration menu is shown in Figure 176
on page 560.
3. From the Keys/Certificate menu, type 3 to select Public Key
Infrastructure (PKI) Configuration.
The Public Key Infrastructure (PKI) Configuration menu is shown
in Figure 182 on page 585.
4. From the Public Key Infrastructure (PKI) Configuration menu, type 2
to select X509 Certificate Management.
The X509 Certificate Management menu is shown in Figure 183
on page 585.
5. From the X509 Certificate Management menu, type 5 to select View
Certificate Details.
The following prompt is displayed:
Enter certificate name ->
6. Enter a name of the certificate you want to view. (This field is case
sensitive.)