Allied Telesis AT-S63 - Manual (Page 588)

Chapter 27: PKI Certificates and SSL
588 Section IV: Security
Adding a Certificate to the Database
After you have created a certificate or received a certificate from a public
or private CA, you need to add it into the certificate database to make it
available for use by the switch’s web server. After you add a certificate to
the certificate database, it appears in the X509 Certificate Management
menu.
To add a certificate to the certificate database, perform the following
procedure:
1. From the Main Menu, type 8 to select Security Configuration.
The Security Configuration menu is shown in Figure 175 on page
559.
2. From the Security Configuration menu, type 3 to select
Keys/Certificates Configuration.
The Keys/Certificates Configuration menu is shown in Figure 176
on page 560.
3. From the Keys/Certificate menu, type 3 to select Public Key
Infrastructure (PKI) Configuration.
The Public Key Infrastructure (PKI) Configuration menu is shown
in Figure 182 on page 585.
4. From the Public Key Infrastructure (PKI) Configuration menu, type 2
to select X509 Certificate Management.
The X509 Certificate Management menu is shown in Figure 183
on page 585.
5. From the X509 Certificate Management menu, type 2 to select Add
Certificate.