Allied Telesis AT-S63 - Manual (Page 641)

AT-S63 Management Software Menus Interface User’s Guide
Section IV: Security 641
Configuring RADIUS Accounting
The AT-S63 management software supports RADIUS accounting for
ports operating in the Authenticator role. The accounting information
sent by the switch to a RADIUS server includes the date and time when
clients log on and log off, as well as the number of packets sent and
received by a switch port during a client session. For background
information on this feature, refer to ”RADIUS Accounting” on page 624.
This feature is disabled by default on the switch.
To configure this feature, perform the following procedure:
1. From the Main Menu, type 8 to select Security Configuration.
The Security Configuration menu is shown in Figure 175 on page 559.
2. From the Security Configuration menu, type 1 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 197 on
page 629.
3. From the Port Access Control (802.1X) menu, type 7 to select
Configure Accounting.
The RADIUS Accounting menu is shown in Figure 204.
Figure 204 Radius Accounting Menu
4. Adjust the following parameters as necessary.
1 - Status
This parameter activates or deactivates RADIUS accounting on
the switch. Select Enabled to activate the feature or Disabled to
deactivate it. The default is Disabled.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
RADIUS Accounting
1 - Status............ Disabled
2 - Port.............. 1813
3 - Type.............. Network
4 - Trigger Type...... Start_Stop
5 - Update Status..... Disabled
6 - Update Interval... 60
R - Return to Previous Menu
Enter your selection?