Allied Telesis AT-S63 - Manual (Page 375)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Features 375
The Configure SNMPv3 Notify Table menu is shown in Figure 115
on page 372.
3. From the Configure SNMPv3 Notify Table menu, type 3 to select
Modify SNMPv3 Table Entry.
The Modify SNMPv3 Notify Table menu is displayed as shown in
Figure 116.
Figure 116. Modify SNMPv3 Notify Table Menu
Note
To display a Group Name and its associated parameters from the
Configure SNMPv3 SecurityToGroup Table menu, type N to display
the Next Page and P to display the previous page.
4. To modify the Notify Tag, type 1 to select Set Notify Tag.
The following prompt is displayed:
Enter Notify Name:
5. Enter a Notify Name.
The following prompt is displayed:
Enter Notify Tag:
6. Enter the new Notify Tag.
Enter an alphanumeric value of up to 32 characters.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Modify SNMPv3 Notify Table
Notify Name ................... softwareeengineering
Notify Tag..................... softwareeengineeringtag
Notify Type.................... Inform
Storage Type .................. NonVolatile
Row Status .................... Active
1 - Set Notify Tag
2 - Set Notify Type
3 - Set Storage Type
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?