Allied Telesis AT-S63 User Manual

Page 380

Chapter 18: SNMPv3

380

Section II: Advanced Features

2. From the Configure SNMPv3 Table menu, type 7 to select Configure

SNMPv3 Target Address Table.

The Configure SNMPv3 Target Address Table menu is shown in
Figure 117.

Figure 117. Configure SNMPv3 Target Address Table Menu

3. To create an entry in the SNMPv3 Target Address Table, type 1 to

select Create SNMPv3 Table Entry.

The following prompt is displayed:

Enter Target Address Name:

4. Enter the name of the SNMP manager, or host, that manages the

SNMP activity on your switch.

You can enter a name of up to 32 alphanumeric characters.

The following prompt is displayed:

Enter IP Address:

5. Enter the IP address of the host.

Use the following format for an IP address:
XXX.XXX.XXX.XXX

The following prompt is displayed:

Enter UDP Port#: [0 to 65535]-> 162

Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63

Marketing

User: Manager

11:20:02 02-Oct-2004

Configure SNMPv3 Target Address Table

Target Addr Name ... host451

Timeout ..... 1500

Target Parameters .. SNMPmanagerPC

Retries ..... 3

IP Address ......... 198.35.11.1

UDP Port# ... 162

Storage Type ....... NonVolatile

Row Status .. Active

Tag List ........... hwengTrap hwengInform swengTrap swengInform

1 - Create SNMPv3 Table Entry
2 - Delete SNMPv3 Table Entry
3 - Modify SNMPv3 Table Entry

U - Update Display
R - Return to Previous Menu

Enter your selection?