Allied Telesis AT-S63 - Manual (Page 153)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 153
The Modify Trunk menu is displayed. The menu displays the
operating specifications of the selected trunk, as shown in Figure
44.
Figure 44. Modify Trunk Menu
Note
You cannot change a trunk’s ID number.
5. To modify a port trunk’s name, type 2 to select Trunk Name and, when
prompted, enter the new name for the trunk. The name can be up to
16 alphanumeric characters. No spaces or special characters, such as
asterisks and exclamation points, are allowed. Each trunk must have a
unique name.
6. To change the trunk’s load distribution method, type 3 to toggle the
selection through the following possible settings.
SRC MAC - Source MAC address
DST MAC - Destination MAC address
SRC/DST MAC - Source address /destination MAC address
SRC IP - Source IP address trunking
DST IP - Destination IP address trunking
SRC/DST IP - Source address /destination IP address
For background information on these selections, refer to ”Load
Distribution Methods” on page 143.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Modify Trunk
1 - Trunk ID ......... 2
2 - Trunk Name ....... Server11
3 - Trunk Method ..... SRC/DST MAC
4 - Trunk Ports ...... 12-16
M - Modify Trunk
R - Return to Previous Menu
Enter your selection?