Allied Telesis AT-S63 - Manual (Page 586)

Chapter 27: PKI Certificates and SSL
586 Section IV: Security
Note
In the X509 Certificate Management menu, MTrust means manually
trusted. This field indicates that you verified the certificate. The
Source field indicates the certificate was generated on the switch.
Both MTrust and Source are read-only fields.
5. Type 1 to select Create Self-Signed Certificate.
The Create Self-Signed Certificate menu is shown in Figure 184.
Figure 184. Create Self-Signed Certificate Menu
6. Type 1 to select Certificate Name to enter a file name for the
certificate.
The following prompt is displayed:
Enter certificate name (24 char max) ->
7. Enter a file name for the certificate. This is the file name under which
the certificate will be stored in the AT-S63 file system. The name can
be up to 24 alphanumeric characters. Spaces are allowed.
Note
The AT-S63 management software automatically adds a “.cer”
extension to the filename.
8. Type 2 to select Key Pair ID.
The following prompt is displayed:
Enter certificate Key Pair ID -> [0 to 65535] ->
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Create Self-Signed Certificate
1 - Certificate Name.............
2 - Key Pair ID.................. 0
3 - Format....................... DER
4 - Serial Number................ 0
5 - Subject DN...................
6 - Create Self-Signed Certificate
R - Return to Previous Menu
Enter your selection?