Allied Telesis AT-S63 - Manual (Page 525)

AT-S63 Management Software Menus Interface User’s Guide
Section IV: Security 525
The Display Port Security menu is shown in Figure 170.
Figure 170. Display Port Security Menu
The Display Port Security menu displays a table that contains the
following columns of information:
Port
The number of the port.
Security Mode
The active security mode on the port.
Threshold
The maximum number of dynamic MAC addresses the port learns.
It only applies when a port is operating in the Limited security
mode.
Intruder Action
The action taken by the switch if a port receives an invalid frame.
The possible settings are:
No Action (Discard) - The port discards invalid frames. This is the
default.
Trap - The port discards invalid frames and sends a trap. This
applies only to the Limited security mode.
Trap/Disable - The port discards invalid frames, sends a trap, and
disables the port. This applies only to the Limited security mode.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Display Port Security
Port Security Mode Threshold Intruder Action Participating
--------------------------------------------------------------
1
Limited 6 Trap Yes
2 Limited 10 Trap Yes
3 Automatic --- ------ ---
4 Locked --- No Action No
5 Automatic --- ------ ---
6 Automatic --- ------ ---
7 Automatic --- ------ ---
8 Secured --- No Action No
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?