Allied Telesis AT-S63 - Manual (Page 561)

AT-S63 Management Software Menus Interface User’s Guide
Section IV: Security 561
The Create Key menu is shown in Figure 178.
Figure 178. Create Key Menu
5. Type 1 to select Key ID.
The following prompt is displayed:
Enter Key Id -> [0 to 65535] -> 0
6. Enter an identification number for the key. This number can be from
0 to 65,535. This number is used only for identification purposes and
not in generating the actual encryption key. The ID for each key on
the switch must be unique.
Note
You cannot change the value for option 2, Key Type. This value is
always RSA - Private.
7. Type 3 to select Key Length.
The following prompt is displayed:
Enter Key Length ->[512 to 1536] -> 512
8. Enter a key length. The range is 512 to 1,536 bits, in increments of 256
bits (for example, 512, 768, 1024, etc). Before selecting a key length,
note the following
❑ For SSL and web browser encryption, key length can be any valid
value within the range.
❑ For SSH host and server key pairs, the two keys must be created
separately and be of different lengths of at least one increment
(256 bits) apart. The recommended length for the server key is 768
bits and the recommended length for the host key is 1024 bits.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Create Key
1 - Key ID ............. 0
2 - Key Type ........... RSA-Private
3 - Key Length ......... 512
4 - Key Description ....
5 - Generate Key
U - Update Display
R - Return to Previous Menu
Enter your selection?