Snmp management session – Allied Telesis AT-S63 User Manual

Page 35

Text mode
Original mode

AT-S63 Management Software Menus Interface User’s Guide

SNMP Management Session

Another way to remotely manage the switch is with an SNMP
management program. A familiarity with how to use management
information base (MIB) objects is necessary for this type of management.

The AT-S63 software supports the following MIBs:

❑ SNMP MIB-II (RFC 1213)

❑ Bridge MIB (RFC 1493)

❑ Interface Group MIB (RFC 1573)

❑ Ethernet MIB (RFC 1643)

❑ Remote Network MIB (RFC 1757)

❑ Allied Telesyn managed switch MIBs

You must download the Allied Telesyn managed switch MIBs
(atistackinfo.mib and atiswitch.mib) file from the Allied Telesyn web site
and compile the files with your SNMP program. For instructions, refer to
your SNMP management documentation.

Note

SNMP management does not use the enhanced stacking feature of
the switch. Therefore, you must assign an IP address to each switch
that you want to manage with an SNMP program.