Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) User Manual
Page 93
Brocade Virtual ADX Graphical User Interface Guide
81
53-1003242-01
Real servers
7
6. Under Enhanced Weight, enter the following information:
Least Connection Weight: Enter the weight of the real server relative to other real servers in
terms of the number of connections on the server. The weight is based on the number of
session table entries for TCP or UDP sessions with the real server.
7. Click the Advanced tab to configure advanced parameters for the real server configuration.
The Advanced tab is displayed, as shown in
.
FIGURE 67
Configuring advanced parameters
8. Provide the following information:
•
Health Check Tracking: Click one of the following options:
NOTE
If any service port is down for a real server, the Brocade Virtual ADX does not consider the
track port group or track port configuration on the real server for load balancing. You must
configure every port in a track port group or track port configuration to be “sticky” and
bind them to the real server.
•
Track Group: Allows the Brocade Virtual ADX to send client requests for applications
within a group of up to eight ports to the same real server, regardless of which
application the client requests first. Whenever a client attempts to connect to a port
within the port group, the Brocade Virtual ADX ensures that all ports in the group are
active before granting the connection.
•
Track Port: Allows the Brocade Virtual ADX to send all client requests for a specific set
of TCP or UDP ports to the same real server as a master TCP or UDP port grouped with
up to four other ports. The tracking applies only to the master port.
•
None: Disables track group and track port health check tracking. By default, health
check tracking is disabled.
•
Master Port: For the Track Port option only, choose the port as the master port.
•
Track Ports: For the Track Group option, choose up to eight TCP or UDP ports. A port can be
part of only one track port group. For the Track Port option, choose up to four TCP or UDP
ports.