beautypg.com

Ipv6 interface, Ipv6 interface details – Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) User Manual

Page 194

background image

182

Brocade Virtual ADX Graphical User Interface Guide

53-1003242-01

Interface statistics

12

IPv6 interface

Clicking IPv6 under Interfaces displays the active IPv6 interfaces on the device.

This tab displays a table listing all active IPv6 connections with their associated values:

IPv6 interface details

Selecting an IPv6 instance on the IPv6 interface tab activates the Details button. Clicking the
Details button opens the IPv6 Interface Details tab.

This tab has a table listing all the recorded attributes for that IPv6 connection:

TABLE 42

IPv6 Interface tab

Column

Content

IP Address

IPv6 address of the route's destination.

Next Hop

IP address of the next-hop router for this path.

Type

The interface type for this IP address. (BGP, OSPF, Static)

Router Interface

Router interface used by this IP address.

Cost

Connection cost for this IP address. (The cost of a route to reach a destination is the sum of
the costs of each link that will be traversed on the way to the destination.)

TABLE 43

IPv6 Interface Details tab

Column

Content

Port

Port that this IP address is connected to.

IP Address

IPv6 address of the route's destination.

Encapsulation

How IPv6 encapsulation is being made.

Metric

The value of the route’s MED attribute. If the route does not have a metric, this field is
blank.

Proxy ARP

Proxy Address Resolution Protocol status. Options are Enabled or Dis ab pled

IP Flow Switching

IP flow switching status.

Helper Addresses
are configured

Options are Yes or No.

Inbound IP Access
list is set

Options are Yes or No.

Status

Options are Up (green arrow) or Down (red arrow).

Subnet Mask

Subnet mask for this IP address.

Maximum
Transmission Unit
(MTU)

Size (in bytes) of the largest protocol data unit that this connection can pass onwards.

Directed Broadcast
Forwarding

Options are Enabled or Disabled.

IP ARP Age

Age in minutes of the Address Resolution Protocol cache entry. A value of 0 means that it
was cached less than a minute previously.