Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 82)

70 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Virtual servers
7
• Under Rate Limiting, you can configure the following information:
• Maximum TCP Connection Rate: Enter the maximum number of TCP connections per
second. There is no default. The maximum connection rate can be from 1 to
4000000.
• Maximum UDP Connection Rate: Enter the maximum number of UDP connections per
second. There is no default. The maximum connection rate can be from 1 to
4000000.
5. Click Advanced to configure the advanced parameters on the virtual server.
The Advanced tab is displayed, as shown in Figure 57 .
FIGURE 57 Configuring advanced parameters
6. Provide the following information:
• Tracking: Click one of the following options.
• Track Group — Allows the client to use the same server for applications associated
with the grouped ports, as long as all the ports in the group are active.
• Track Port — Allows the client to use the same server for applications associated with
the grouped ports, as long as the primary port is active.
• None — Allows the client to disable the tracking option on the real server.
• Master Port: Select a master port from the list.
• Tracked Ports: Select tracked ports from the list.
• TCP Age: Specify the number of minutes the Brocade Virtual ADX allows a TCP connection
to remain inactive before closing the connection. The range is from 2 through 60 minutes.
The default value is 30 minutes.
• UDP Age: Specify the number of minutes the Brocade Virtual ADX allows a UDP connection
to remain inactive before closing the connection. The range is from 2 through 60 minutes.
The default value is 5 minutes.
• Sticky Age: Specify the number of minutes a sticky server connection can remain inactive
before aging out. The range is from 2 through 60 minutes. The default value is 5 minutes.
• Under VIP Protection, Select the Enable check box to enable VIP protection.