Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 157)

Brocade Virtual ADX Graphical User Interface Guide 145
53-1003242-01
SSL profiles
9
7. Click Advanced tab to configure advanced parameters for the SSL profile.
The Advanced tab is displayed, as shown in Figure 117 .
FIGURE 117 Configuring advanced parameters
8. Provide the following information:
• CLOSE-NOTIFY Alert: Select the Enable check box to configure the device to send an alert
before closing an SSL session.
• SSL Session Cache: Select the Enable check box to configure the device to share the same
SSL session for multiple SSL connections:
• Cache Timeout: Specify how long the SSL sessions can be held in the cache. The
range is from 30 through 86400 seconds.
• Max Entries: Enter the maximum number of cache entries per SSL profile. The range is
from 512 through 8192.
• TCP Profile: Select a profile in the list. To configure a TCP profile for the SSL profile, click
Manage TCP profile. To manage the TCP profile, refer to
“Managing the TCP profile” on
page 146.
9. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
For more information on configuring SSL profiles, refer to the Brocade Virtual ADX Security Guide.