Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 66)

54 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Device management
5
3. Click TFTP in the sidebar sub-menu to display the TFTP controls.
The TFTP Settings tab is displayed. See Figure 41 .
FIGURE 41 TFTP Settings tab
4. Check the TFTP on VLAN Enabled box to open the VLAN ID sub-menu.
5. Click the VLAN ID sub-menu and select TFTP on VLAN to display the TFTP on VLAN controls.
6. Click Apply at the bottom right corner to apply any change you have made, or click Reset to
discard all changes.
The TFTP on VLAN panel has the following controls. See Table 20 .
TABLE 20 TFTP on VLAN panel controls
Column Content
TFTP on VLAN If marked, enables the use of TFTP on this server’s VLAN.
VLAN ID The VLAN ID of this server. Options are None or a numerical value.