Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 238)

226 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Session information
13
Filtering the session table
To filter the sessions, perform the following steps within the Monitor tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Sessions, and then select Sessions Lookup.
The Sessions Lookup page is displayed, as shown in Figure 159 .
FIGURE 159 Session Lookup
The Session Lookup page displays the search criteria with specific fields. Enter your search criteria
based on your requirement and click Search.
The following table describes the fields available in the Sessions Lookup page.
When you click Search, the session lookup results is displayed in the table. Click Download Session
Details to save the session values. The information in the table are saved in csv format.
NOTE
You must specify a minimum of five search criteria, if the BP ID is not specified in the search criteria.
TABLE 77 Sessions Lookup page - fields and descriptions
Field Description
Search Criteria
Source IP Enter the source IP address.
Source Port Select the source port from the list.
Destination IP Enter the destination IP address.
Destination Port Select the destination port from the list.
Protocol Select the protocol that you want from the list.
Age Enter the age value.
BP ID Enter the ID of the Barrel Processor (BP).