Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 115)

Brocade Virtual ADX Graphical User Interface Guide 103
53-1003242-01
Health checks
7
To configure a boolean health check policy on the Brocade Virtual ADX, perform the following steps
within the Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Health Checks, and then select Element Health Checks.
3. Click New Boolean Health Check at the bottom of the Element Health Checks page.
The Boolean Health Check - new page is displayed, as shown in Figure 84 .
FIGURE 84 Configuring boolean health check
4. Provide the following information:
• Boolean Health Check Name: Enter the name for the boolean health check policy.
• Health Check 1: Select a health check policy from the list.
• Condition: Specifies a logical operator in the health check policy. You can enter two
element-action expressions along with the logical operator AND, OR, or NOT. Select a
boolean operator from the list.
• Health Check 2: Select a health check policy that should be compared with Health Check
1 policy.