Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 127)

Brocade Virtual ADX Graphical User Interface Guide 115
53-1003242-01
Content switching
7
3. Click New at the bottom of Response Rules page.
The Response Rule - new page is displayed, as shown in Figure 91 .
FIGURE 91 Creating a response rule
4. Provide the following information:
• Rule Name: Enter the name of the response rule.
• Ignore Case: Select the check box if you want to the rule to be case insensitive.
• Rule Type: Click one of the rule types described in the Table 24 .
TABLE 24 Rule type settings
Rule Type Function Your Action
Response
Status
Code Allows the Brocade
Virtual ADX to inspect
the response based on
the code found in the
response. Under the Settings for Response Status Code Rule, enter the code
range in the Status Code Range
to inspect a response only if the
code is within the specified range.