Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 197)

Brocade Virtual ADX Graphical User Interface Guide 185
53-1003242-01
IP statistics
12
ICMP Statistics
To view the Internet Control Message Protocol (ICMP) sent and received information, perform the
following steps within the Monitor tab.
1. Click Network on the menu bar.
2. From the sidebar, select IP Traffic, and then select ICMP.
The ICMP page is displayed, as shown in Figure 140 . By default, Received Messages tab is
displayed in the ICMP page, which provides information on the messages received by the
Brocade Virtual ADX. Click the Sent Messages tab to view the messages sent by the Brocade
Virtual ADX.
Click the Sent Error Messages tab to view the error messages sent by the Brocade Virtual ADX.
To view the ICMP statistics in the graphical format, click Graph. To switch the view between
tabular and graphical format, click the Details or Graph on top right corner of the ICMP page.
The total and the individual counts of IPv4 messages for the statistics types are displayed.
FIGURE 140 Displaying the ICMP traffic
The following table describes the fields available in the ICMP Received and Sent Messages.
TABLE 45 ICMP Received, Sent, and Sent Error Messages - fields and descriptions
Field Description
Received/Sent Displays the total number of ICMP messages received/sent by the
device.
NOTE: The Received field is displayed in the ICMP Received
Message tab, while the Sent field is displayed in the ICMP
Sent Message tab.
Echo Reply Displays the total number of ICMP echo reply messages
received/sent by the device.
Destination Unreachable Displays the total number of ICMP destination unreachable
messages received/sent by the device.