Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 165)

Brocade Virtual ADX Graphical User Interface Guide 153
53-1003242-01
Access Control Lists
9
3. Click New IPv4 Extended ACL at the bottom of the ACL Summary page.
The ACL IPv4 Extended - new page is displayed, as shown in Figure 125 .
FIGURE 125 Configuring extended ACL
4. Provide the following information:
• ACL ID / Name: Select one of the following options:
• ID#: Enter the number to identify a collection of individual ACL entries. The range is
from 100 through 199. By default, ACL ID is enabled.
• Name: Enter the name of the ACL.
• Action: Click one of the following options:
• Permit — Permits the packets that matches the ACL policy.
• Deny — Denies the packets that matches the ACL policy.
• Log: Select the check box to generate a system log entry for packets that are denied by the
ACL entry. This option is enabled when you choose Deny action.
• Protocol Match: Select a protocol in the list to provide the type of IP packet you are
filtering.
• Match established connections: Select the check box to enable the policy only to the
established TCP connections, and not to new sessions.
• Remark: Enter the remark.