Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 160)

148 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
SSL profile bindings
9
The SSL Profile Bindings page is displayed, as shown in Figure 119 .
FIGURE 119 Binding the profile
3. Click Bind SSL Profiles at the bottom of SSL Profile Bindings page.
The Add Profile Bindings page is displayed, as shown in Figure 120 .
FIGURE 120 Adding profile bindings
4. Under Bind VIP Port to a Profile, select Terminate, enter the following information:
• Server Profile: Select an SSL profile from the list.
• TCP Profile: Select a TCP profile from the list.
5. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
NOTE
Optionally, you can also bind a real server port to a virtual server port.
For more information on binding the SSL profiles, refer to the Brocade Virtual ADX Security Guide.
To be supplied