Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 268)

256 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Web interface does not reflect changes based on the latest image
A
• Make sure that you have installed Flash Player 10.2 or higher in the system. You can download
the Flash Player from www.adobe.com.
• Make sure that you open the web interface using one of the following web browsers: Google
Chrome, Internet Explorer, and Mozilla Firefox web browsers. You can also use other web
browsers such as Safari, Opera and so on to open the web interface if they have flash installed
in the system. However, the ADX web interface has not been validated with these browsers.
Web interface does not reflect changes based on the latest image
Problem
The Brocade Virtual ADX web interface does not reflect the changes after upgrading a new image.
Solution
Clear the cache on the web browser and try again. The procedure to clear the browser cache vary
based on Web browsers. Therefore, refer to the respective help documentation to clear the cache.
RSL error (#2032 Stream Error) when launching the web interface
Problem
An RSL error "#2032 Stream Error” is encountered when you open the Brocade Virtual ADX Web
interface. The error message indicates that the SWZ or SWF file is not being found.
Solution
• Download the signed framework RSL from the Adobe web site.
• Deploy a local signed framework RSL in case of limited or loss of internet connectivity.