Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 152)

140 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
SSL certificates
9
3. Click Generate CSR at the bottom of SSL Certificates page.
The Generate CSR page is displayed, as shown in Figure 111 .
FIGURE 111 Generating a CSR
4. Provide the following information:
• Key File: Select the private keys you generated.
• Organization: Enter the name of your organization; for example, Brocade.
• Domain: Enter the name of your domain; for example, www.brocade.com.
• Department: Enter the name of the department; for example, Web Administration.
• City: Enter the name of your city; for example, San Jose.
• Email: Enter the e-mail address; for example, [email protected].
• State: Enter the name of your state; for example, California.
• Country: Enter the name of your country; for example, US. Only two characters are allowed.
5. Click Generate Request.
Click Clear to clear all the entries in the fields.
Uploading the existing certificates
You can upload the certificate to the device, after you receive an SSL certificate from the CA. The
maximum supported size of an SSL certificate is 3000 bytes.
To upload the certificate, perform the following steps within the Configure tab.
1. Click Security on the menu bar.
2. From the sidebar, select SSL, and then select SSL Certificates.