Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 155)

Brocade Virtual ADX Graphical User Interface Guide 143
53-1003242-01
SSL profiles
9
To create an SSL profile, perform the following steps within the Configure tab.
1. Click Security on the menu bar.
2. From the sidebar, select SSL, and then select SSL Profiles.
The SSL Profiles page is displayed, as shown in Figure 114 .
FIGURE 114 SSL profile summary
3. Click New at the bottom of SSL Profiles page.
The Configure SSL Profile page tab is displayed, as shown in Figure 115 .
FIGURE 115 Configuring a profile
4. Under Basic tab, provide the following information:
• Profile Name: Enter the name of the SSL profile being defined.
• Key File: Select the RSA key pair file that was generated to associate it with the SSL profile.
• Certificate File: Select the certificate file that was self generated or imported to associate
it with the SSL profile.