Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 187)

Brocade Virtual ADX Graphical User Interface Guide 175
53-1003242-01
System logs
11
The following table describes the fields available in the Software Information pane.
For more information on system summary, refer to the Brocade Virtual ADX Administration Guide.
System logs
The Brocade Virtual ADX contains a syslog agent that writes log messages to a local buffer and
optionally to a third-party syslog server. The local buffer is cleared during a system reload or reboot.
To ensure the messages remain available even after a system reload, configure the Brocade Virtual
ADX to store the messages in the syslog server. For more information on syslog server, refer to the
Brocade Virtual ADX Administration Guide.
To display the entries in the system log, perform the following steps within the Monitor tab.
1. Click System on the menu bar.
2. From the sidebar, select System Logs.
The System Logs page is displayed, as shown in Figure 136 .
FIGURE 136 Viewing the system log
TABLE 36 Software Information pane
Field Description
Image Displays the image types installed on the Brocade Virtual ADX. The image types are as
follows:
•
Running - Indicates the current image running on the Brocade Virtual ADX.
•
Boot - Displays the boot version of the Brocade Virtual ADX.
Version Displays the release version of the software running on the Brocade Virtual ADX.
Image Name Displays the name of the image.
Build Type Displays the type of the build loaded in the Brocade Virtual ADX. The build type are as
follows:
•
Router - Indicates the type of the build is router.
•
Switch - Indicates the type of the build is switch.
Build Date Displays the date on which the image is built.