Telnet allowed clients – Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) User Manual
Page 64
52
Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Device management
5
The Telnet Settings tab has the following controls. See
.
Use the Telnet Settings tab to perform the following functions after populating the necessary fields:
•
Click Apply at the bottom right corner to apply any change you have made.
•
Click Reset to discard all changes.
•
Click the Telnet Allowed Clients button to display the Telnet Allowed Clients tab. See
.
Telnet Allowed Clients
To view the Telnet Allowed Clients page, perform the following steps within the Configure tab.
1. Click System on the menu bar.
2. From the sidebar, select Device Management.
3. Click Telnet in the sidebar sub-menu to display the Telnet controls.
The Telnet Settings tab is displayed.
TABLE 18
Telnet Settings tab controls
Control
Description
Telnet
Select the Enable check box to enable Telnet access to the server. If you do not select
this check box, all other controls are dimmed and disabled.
Authentication
Select the Enable check box to enable authentication on Telnet access to the server.
Password
The password for Telnet access. Enter an password from 1 to 48 characters.
Encryption
Select the Enable check box to encrypt the Telnet password.
Source Interface
Choose an interface to be used for connecting to the server using Telnet.
Login Retries
Number of failed authentication attempts allowed before the account is locked. Enter a
number from 0 to 5. The default is 4.
Login Timeout
Length of time in minutes allowed to complete login. Enter a number from 1 to 10. The
default is 2 minutes.
Idle Timeout
Length of time in minutes that an account is allowed to have no activity. Enter a
number from 0 to 240. The default is 0. The value of 0 is no time out.
VLAN ID
(Optional) The VLAN ID of this server. Choose None or a value from 0 to 4095.
ACL ID (IPv4)
IPv4 ACL ID of this account. Options are None and values from 0–99. (Optional)
ACL ID (IPv6)
IPv6 ACL ID of this account. Options are None and values from 0–99. (Optional)