Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 105)

Brocade Virtual ADX Graphical User Interface Guide 93
53-1003242-01
Health checks
7
To create a port profile on the Brocade Virtual ADX, perform the following steps within the Configure
tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Port Profiles.
The Port Profiles page is displayed, as shown in Figure 77 .
FIGURE 77 Port profile summary
3. Click New at the bottom of the Port Profiles page.
4. The Port Profile - new page tab is displayed, as shown in Figure 78 .
FIGURE 78 Creating port profile
5. Under Basic tab, provide the following information:
• Port: Select the well-known port name for the health check from the list.
• Admin State: Select the Enable check box for enable the port profile.