beautypg.com

Specifying a port address, Icx 6430 and icx 6450, Icx 6610 – Brocade FastIron Ethernet Switch Administration Guide User Manual

Page 55

background image

Specifying a port address

You can specify a port address for an uplink (data) port, stacking port, or a management port.

ICX 6430 and ICX 6450

Specifying a data port

The port address format is is stack unit/slot/port, where:

stack unit --Specifies the stack unit ID. For the ICX 6430, range is from 1 to 4. For the ICX 6450,

range is from 1 to 8. If the device is not part of a stack, the stack unit ID is 1.

slot --Specifies the slot number. Can be 1 or 2.
port --Specifies the port number in the slot. Range is from 1 to 24 (24-port models) or 1 to 48 (48-port

models).

This example shows how to specify port 2 in slot 1 of a device that is not part of a stack:

Brocade (config) # interface ethernet 1/1/2

Specifying a stacking port

The port address format is is stack unit/slot/port, where:

stack unit --Specifies the stack unit ID. For the ICX 6430, range is from 1 to 4. For the ICX 6450,

range is from 1 to 8.

slot --Specifies the slot number. Stacking ports are in slot 2.
port --Specifies the port number in the slot. Stacking ports are 1, 2, 3, and 4.

This example shows how to specify stacking port 3 in slot 2 of unit 3 in a stack:

Brocade (config) # interface ethernet 3/2/3

Specifying a management port

The management port number is always 1. This example shows how to specify the management port:

Brocade (config) # interface management 1

ICX 6610

Specifying a data port

The port address format is is stack unit/slot/port, where:

stack unit --Specifies the stack unit ID. Range is from 1 to 8. If the device is not part of a stack, the

stack unit ID is 1.

slot --Specifies the slot number. Can be 1 or 3.
port --Specifies the port number in the slot. Range is from 1 to 24 (24-port models) or 1 to 48 (48-port

models).

This example shows how to specify port 2 in slot 1 of a device that is not part of a stack:

Brocade (config) # interface ethernet 1/1/2

Specifying a port address

FastIron Ethernet Switch Administration Guide

55

53-1003075-02