Basic software features, Supported basic software features – Brocade FastIron Ethernet Switch Administration Guide User Manual
Page 29
Basic Software Features
Supported basic software features
Lists basic software features supported on FastIron devices.
The following table lists the individual BrocadeFastIron switches and the basic software features they
support. These features are supported in the Layer 2 and Layer 3 software images, except where
explicitly noted.
Feature
ICX 6430
ICX 6450
FCX
ICX 6610
ICX 6650
FSX 800
FSX 1600
ICX 7750
System name, contact, and location
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
SNMP trap receiver and trap source
address
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Virtual routing interface statistics via
SNMP
No
No
No
No
08.0.01
08.0.01
08.0.10
Disabling Syslog messages and traps for
CLI access
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Cancelling an outbound Telnet session
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Network Time Protocol Version 4 (NTP)
08.0.01
08.0.01
08.0.01 (on
the router
code only)
08.0.01
No
08.0.01
1
08.0.10
Enhancement to port group naming
08.0.01
08.0.01
08.0.01
08.0.01
No
08.0.01
08.0.10
Show interface enhancements
08.0.01
08.0.01
08.0.01
08.0.01
No
08.0.01
08.0.10
System clock
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Byte-based broadcast, multicast, and
unknown-unicast limits
No
No
No
No
No
08.0.01
08.0.10
Packet-based broadcast, multicast, and
unknown-unicast limits
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
CLI banners
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Port name
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
1
2nd and 3rd generation modules
FastIron Ethernet Switch Administration Guide
29
53-1003075-02