Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 153)

Foundry Discovery Protocol (FDP) and Cisco Discovery Protocol
(CDP) Packets
● Supported discovery protocol features..........................................................................153
● FDP Overview............................................................................................................... 153
● CDP packets................................................................................................................. 158
Supported discovery protocol features
Lists the discovery protocol features supported on FastIron devices.
The following table lists individual Brocade FastIronswitches and the discovery protocols they support.
These features are supported in the Layer 2 and Layer 3 software images, except where explicitly
noted.
Feature ICX 6430 ICX 6450 FCX ICX 6610 ICX 6650 FSX 800
FSX 1600 ICX 7750
Foundry Discovery Protocol (FDP) for
IPv4 and IPv6 traffic 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Cisco Discovery Protocol (CDP) for IPv4
and IPV6 traffic 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
FDP Overview
The Foundry Discovery Protocol (FDP) enables Brocade devices to advertise themselves to other
Brocade devices on the network. When you enable FDP on a Brocade device, the device periodically
advertises information including the following:
• Hostname (device ID)
• Product platform and capability
• Software version
• VLAN and Layer 3 protocol address information for the port sending the update. IP, IPX, and
AppleTalk Layer 3 information is supported.
A Brocade device running FDP sends FDP updates on Layer 2 to MAC address 00-00-00-CC-CC-CC.
Other Brocade devices listening on that address receive the updates and can display the information in
the updates. Brocade devices can send and receive FDP updates on Ethernet interfaces.
FDP is disabled by default.
FastIron Ethernet Switch Administration Guide 153
53-1003075-02