Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 355)

Message OSPF virtual intf retransmit, rid router-id , intf
addr ip-addr , nbr rid nbr-router-id , pkt type is
pkt-type , LSA type lsa-type , LSA id lsa-id , LSA
rid lsa-router-id
Explanation An OSPF interface on the Brocade device has retransmitted a Link State
Advertisement (LSA).
The router-id is the router ID of the Brocade device.
The ip-addr is the IP address of the interface on the Brocade device.
The nbr-router-id is the router ID of the neighbor router.
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
The lsa-type is the type of LSA.
The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
Message
Level Notification
Message OSPF virtual intf state changed, rid router-id ,
area area-id , nbr ip-addr , state ospf-state
Explanation Indicates that the state of an OSPF virtual routing interface has changed.
The router-id is the router ID of the router the interface is on.
The area-id is the area the interface is in.
The ip-addr is the IP address of the OSPF neighbor.
The ospf-state indicates the state to which the interface has changed and
can be one of the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
Message
Level Notification
Syslog messages
FastIron Ethernet Switch Administration Guide 355
53-1003075-02