Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 301)

disable system-monitoring all
Disables system monitoring at the global level for all types.
Syntax disable system-monitoring all
Modes Privileged EXEC mode.
Usage Guidelines Disabling sysmon at the global level disables any individually configured and enabled sysmon tasks as
well. However, any sysmon configuration that is made, including global and event-specific configuration
are retained.
Examples The following example disables system monitoring:
Brocade# disable system-monitoring all
enable system-monitoring all
Enables system monitoring at the global level for all event types.
Syntax enable system-monitoring all
Modes Privileged EXEC mode.
Usage Guidelines This command enables system monitoring globally, and covers all event-specific system monitoring
configuration as well. If specific configuration is not made for different types, default values defined at
the global level are used.
Examples The following example enables all system monitoring tasks at the global level:
Brocade# enable system-monitoring all
sysmon timer
Configures the global system monitoring timer.
Syntax sysmon timer minutes
Parameters minutes
Specifies the system monitoring timer in minutes. The range of values is 1 through 60. The
default value is 3.
Modes Global configuration mode.
Examples The following example sets the system monitoring timer to five minutes:
Brocade(config)# sysmon timer 5
disable system-monitoring all
FastIron Ethernet Switch Administration Guide 301
53-1003075-02