Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 312)

xbar
Clears cross bar sysmon counters for cross bar. You can specify all or a cross bar identified
by the index.
error
Clears the cross bar sysmon error counters. You can specify all or a cross bar
identified by the index.
link
Clears the cross bar sysmon counters for links. You can specify all or a cross bar
identified by the index.
ecc-error
Clears the ECC error count on FCX and ICX devices. This option is not supported on FSX
devices.
stack-unit
Specifies the stack unit on which errors to be cleared.
all
Specifies that all stack units are cleared of errors.
link-error
Clears the link error count on FCX and ICX devices. This option is not supported on FSX
devices.
stack-unit
Specifies the stack unit on which errors to be cleared.
all
Specifies that all stack units are cleared of errors.
Modes Global configuration mode.
Examples The following example clears the fabric adaptor sysmon counters.
Brocade(config)# clear sysmon counters fa error all
show sysmon logs
Displays the entries written to syslog for all event types if the action specified is to log them into
syslog. If the action specified is none , the sysmon logs display nothing.
Syntax show sysmon logs
Modes Privileged EXEC mode.
Global configuration mode.
show sysmon logs
312 FastIron Ethernet Switch Administration Guide
53-1003075-02