Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 50)

NTP status command output descriptions TABLE 4
Field Description
synchronized Indicates the system clock is synchronized to NTP server or peer.
stratum Indicates the stratum number that this system is operating. Range 2..15.
reference IPv4 address or first 32 bits of the MD5 hash of the IPv6 address of the peer to which clock
is synchronized.
precision Precision of the clock of this system in Hz.
reference time Reference time stamp.
clock offset Offset of clock (in milliseconds) to synchronized peer.
root delay Total delay (in milliseconds) along path to root clock.
root dispersion Dispersion of root path.
peer dispersion Dispersion of root path.
system poll interval Poll interval of the local system.
last update Time the router last updated its NTP information.
server mode Status of the NTP server mode for this device.
client mode Status of the NTP client mode for this device.
master Status of the master mode.
master stratum Stratum number that will be used by this device when master is enabled and no upstream
time servers are accessible.
panic mode Status of the panic mode.
Displaying NTP associations
Use the show ntp associations command to display detailed association information of the NTP
server or peers.
Brocade# show ntp associations
address ref clock st when poll reach delay offset disp
*~172.19.69.1 172.24.114.33 3 25 64 3 2.89 0.234 39377
~2001:235::234
INIT 16 - 64 0 0.00 0.000 15937
* synced, # selected, + candidate, - outlayer, x falseticker, ~ configured
Displaying NTP associations show ntp associations command output descriptions
Displaying NTP associations
50 FastIron Ethernet Switch Administration Guide
53-1003075-02