Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 161)

Displaying CDP statistics
To display CDP packet statistics, enter the show fdp traffic command.
device# show fdp traffic
CDP counters:
Total packets output: 0, Input: 3
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Fragmented: 0
Syntax: show fdp traffic
Clearing CDP information
You can clear the following CDP information:
• Cisco Neighbor information
• CDP statistics
To clear the Cisco neighbor information, enter the clear fdp table command.
device# clear fdp table
Syntax: clear fdptable
To clear CDP statistics, enter the following command.
device# clear fdp counters
Syntax:clear fdp counters
Displaying CDP statistics
FastIron Ethernet Switch Administration Guide 161
53-1003075-02