Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 325)

Message No of prefixes received from BGP peer ip-addr
exceeds maximum prefix-limit...shutdown
Explanation The Layer 3 switch has received more than the specified maximum number
of prefixes from the neighbor, and the Layer 3 switch is therefore shutting
down its BGP4 session with the neighbor.
Message Level Error
Message IPv6: IPv6 protocol disabled on the device from
session-id
Explanation IPv6 protocol was disabled on the device during the specified session.
Message Level Informational
Message IPv6: IPv6 protocol enabled on the device from
session-id
Explanation IPv6 protocol was enabled on the device during the specified session.
Message Level Informational
Message MAC Filter applied to port port-id by username
from session-id (filter id= filter-ids )
Explanation Indicates a MAC address filter was applied to the specified port by the
specified user during the specified session.
session-id can be console, telnet, ssh, or snmp.
filter-ids is a list of the MAC address filters that were applied.
Message Level Informational
Message MAC Filter removed from port port-id by username
from session-id (filter id= filter-ids )
Explanation Indicates a MAC address filter was removed from the specified port by the
specified user during the specified session.
session-id can be console, telnet, ssh, or snmp.
filter-ids is a list of the MAC address filters that were removed.
Message Level Informational
Message Security: Password has been changed for user
username from session-id
Syslog messages
FastIron Ethernet Switch Administration Guide 325
53-1003075-02