Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 333)

Explanation A MAC Based VLAN has been enabled on a port.
Message Level Informational
Message MAC Filter added | deleted | modified from
console | telnet | ssh| snmp session filter id =
MAC filter ID , src MAC = Source MAC address |
any, dst MAC = Destination MAC address | any
Explanation A user created, modified, deleted, or applied this MAC address filter
through the SNMP, console, SSH, or Telnet session.
Message Level Informational
Message MSTP: BPDU-guard interface ethernet port-number
detect (Received BPDU), putting into err-disable
state.
Explanation BPDU guard violation occurred in MSTP.
Message Level Informational
Message OPTICAL MONITORING: port port-number is not
capable.
Explanation The optical transceiver is qualified by Brocade, but the transceiver does not
support digital optical performance monitoring.
Message Level Informational
Message Port p priority changed to n
Explanation A port priority has changed.
Message Level Informational
Message Port portnum , srcip-security max-ipaddr-per-int
reached.Last IP= ipaddr
Explanation The address limit specified by the srcip-security max-ipaddr-per-
interface command has been reached for the port.
Message Level Informational
Syslog messages
FastIron Ethernet Switch Administration Guide 333
53-1003075-02