Network monitoring, Supported network monitoring features, Basic system management – Brocade FastIron Ethernet Switch Administration Guide User Manual
Page 229: Viewing system information

Network Monitoring
Supported network monitoring features
Lists the network monitoring features supported on FastIrondevices.
The following table lists the individual FastIron switches and the network monitoring features they
support. These features are supported in the Layer 2 and Layer 3 software images, except where
explicitly noted.
Feature
ICX 6430
ICX 6450
FCX
ICX 6610
ICX 6650
FSX 800
FSX 1600
ICX 7750
Traffic counters for outbound traffic
08.0.01
08.0.01
No
No
No
08.0.01
08.0.10
Egress queue counters
No
No
08.0.01
08.0.01
08.0.01
No
No
Remote monitoring (RMON)
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Specifying the maximum number of
entries allowed in the RMON Control
Table
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
sFlow version 2
No
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
sFlow version 5 (default)
No
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
sFlow support for IPv6 packets
No
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Uplink utilization lists
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Basic system management
The following sections contain procedures for basic system management tasks.
Viewing system information
You can access software and hardware specifics for a Brocade Layer 2 Switch or Layer 3 Switch. For
software specifics, refer to the section
FastIron Ethernet Switch Administration Guide
229
53-1003075-02