Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 334)

Message Port portnum , srcip-security max-ipaddr-per-int
reached.Last IP= ipaddr
Explanation The address limit specified by the srcip-security max-ipaddr-per-
interface command has been reached for the port.
Message Level Informational
Message Security: console login by username to USER |
PRIVILEGE EXEC mode
Explanation The specified user logged into the device console into the specified EXEC
mode.
Message Level Informational
Message Security: console logout by username
Explanation The specified user logged out of the device console.
Message Level Informational
Message Security: telnet | SSH login by username from src
IP i p-address , src MAC mac-address to USER |
PRIVILEGE EXEC mode
Explanation The specified user logged into the device using Telnet or SSH from either
or both the specified IP address and MAC address. The user logged into
the specified EXEC mode.
Message Level Informational
Message Security: telnet | SSH logout by username from
src IP ip-address, src MAC mac-address to USER |
PRIVILEGE EXEC mode
Explanation The specified user logged out of the device. The user was using Telnet or
SSH to access the device from either or both the specified IP address and
MAC address. The user logged out of the specified EXEC mode.
Message Level Informational
Message SNMP read-only community | read-write community |
contact | location | user | group | view |
engineld | trap [host] [ value -str ] deleted |
added | modified from console | telnet | ssh|
snmp session
Syslog messages
334 FastIron Ethernet Switch Administration Guide
53-1003075-02