Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 354)

The src-ip-addr is the IP address of the interface from which the Brocade
device received the error packet.
The error-type can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Message
Level Notification
Message OSPF virtual intf rcvd bad pkt, rid router-id ,
intf addr ip-addr , pkt src addr src-ip-addr ,
pkt type pkt-type
Explanation Indicates that an OSPF interface received a bad packet.
The router-id is the router ID of the Brocade device.
The ip-addr is the IP address of the interface on the Brocade device.
The src-ip-addr is the IP address of the interface from which the Brocade
device received the authentication failure.
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Message
Level Notification
Syslog messages
354 FastIron Ethernet Switch Administration Guide
53-1003075-02