Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 336)

Message Level Informational
Message STP: VLAN vlan id BPDU-Guard on Port port id
triggered (Received BPDU), putting into err-
disable state
Explanation The BPDU guard feature has detected an incoming BPDU on {vlan-id, port-
id}
Message Level Informational
Message STP: VLAN vlan id Root-Protect Port port id ,
Consistent (Timeout)
Explanation The root protect feature goes back to the consistent state.
Message Level Informational
Message STP: VLAN vlan id Root-Protect Port port id ,
Inconsistent (Received superior BPDU)
Explanation The root protect feature has detected a superior BPDU and goes into the
inconsistent state on { vlan-id , port-id }.
Message Level Informational
Message STP: VLAN vlan-id BPDU-guard port port-number
detect (Received BPDU), putting into err-disable
state
Explanation STP placed a port into an errdisable state for BPDU guard.
Message Level Informational
Message STP: VLAN 1 BPDU-guard port port-number detect
(Received BPDU), putting into err-disable state.
Explanation BPDU guard violation in occurred in STP or RSTP.
Message Level Informational
Message Syslog server IP-address deleted | added |
modified from console | telnet | ssh| snmp OR
Syslog operation enabled | disabled from console
| telnet | ssh| snmp
Syslog messages
336 FastIron Ethernet Switch Administration Guide
53-1003075-02