Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 202)

Displaying LLDP neighbors
The show lldp neighbors command displays a list of the current LLDP neighbors per port.
The following shows an example report.
device#show lldp neighbors
Lcl Port Chassis ID Port ID Port Description System Name
1 0000.0034.0fc0 0000.0034.0fc0 GigabitEthernet9/1 FastIron Supe~
1 0000.0001.4000 0000.0001.4000 GigabitEthernet0/1/1 FastIron SX Swi~
3 0000.0011.0200 0000.0011.0203 GigabitEthernet4 FastIron SX 8~
4 0000.0011.0200 0000.0011.0202 GigabitEthernet3 FastIron SX 8~
4 0000.0011.0200 0000.0011.0210 GigabitEthernet17 FastIron SX 8~
15 0000.0011.0200 0000.0011.020f GigabitEthernet16 FastIron SX 8~
16 0000.0011.0200 0000.0011.020e GigabitEthernet15 FastIron SX 8~
17 0000.0011.0200 0000.0011.0211 GigabitEthernet18 FastIron SX 8~
18 0000.0011.0200 0000.0011.0210 GigabitEthernet17 FastIron SX 8~
Syntax:show lldp neighbors
The following table describes the information displayed by the show lldp neighbors command.
Field Description
Lcl Port The local LLDP port number.
Chassis ID The identifier for the chassis.
Brocade devices use the base MAC address of the device as the Chassis ID.
Port ID The identifier for the port.
Brocade devices use the permanent MAC address associated with the port as the port ID.
Port Description The description for the port.
Brocade devices use the ifDescr MIB object from MIB-II as the port description.
System Name The administratively-assigned name for the system.
Brocade devices use the sysName MIB object from MIB-II, which corresponds to the CLI
hostname command setting.
NOTE
A tilde (~) at the end of a line indicates that the value in the field is too long to display in full and
is truncated.
Displaying LLDP neighbors detail
The show lldp neighbors detail command displays the LLDP advertisements received from LLDP
neighbors.
The following shows an example show lldp neighbors detail report.
Displaying LLDP neighbors
202 FastIron Ethernet Switch Administration Guide
53-1003075-02