Maple Systems 5000HD Series - Manual (Page 74)

68 EZwarePlus Programming Manual
1010-1015, Rev. 03
Build Download Data for SD/USB Disk
Data can be downloaded to the HMI5000P Series using an SD card and USB flash drive. The Build Download
Data function builds the data files to do this.
To build download data for SD card or USB flash drive:
1. Start Utility Manager.
2. Click Build Download Data for SD/USB Disk… The Utility Manager dialog appears.
3. Insert SD card or USB flash drive into PC. Note the drive that represents the SD/USB device.
4. Click Browse... next to Select the folder to save download data: to select the drive that represents
the SD/USB device.
5. Check the boxes that will be the sources for your data and browse to the appropriate file for that
source. Click Build.
 The L Series do not support SD cards.
Download
Sends a compiled project file stored on the computer to the HMI.
Upload
Receives a compiled project file from the HMI to be stored on the computer.
Simulation Settings
On-line Simulation
Opens a compiled project (*.xob) in on-line simulator mode.
Off-line Simulation
Opens a compiled project (*.xob) in off-line simulator mode.