Maple Systems 5000HD Series - Manual (Page 162)

156 EZwarePlus Programming Manual
1010-1015, Rev. 03
4. To use the multiple language feature of the Label Library to display object labels in languages other than the
default language (Language 0), the function must be enabled. Enable the multiple language capability as
detailed below.
Using Languages with the Label Library
The HMI5000P Series supports up to 24 languages for use with the Label Library text labeling. In order to use the
multiple language feature, a label configured in multiple languages must be created and stored in the Label Library, as
detailed above. The language displayed is selected through Internal Local Word Control, LW9134.
1. Text Labels in any of up to 24 languages can be displayed, as configured in the Label Library. In LW9134, a
value of 0 enables Language 1 as configured in the Label Library, a value of 1 enables Language 2, a value of 2
enables Language 3, and a value of 3 enables Language 4, etc.
2. The appropriate value must be written to LW9134 to enable a designated language to display. For example, a
series of set word objects writing a value to LW9134 could be placed on a setup screen. Each set word might
be labeled with the Language to be enabled, and the appropriate value addressed to LW9134. If Set Word #0
enables English and English is the configured Language 0 in the Label Library, pressing the English Set Word
Object writing a 0 to LW9134 will enable label text to display in English. If Set Word #1 enables French and
French is the configured Language 1 in the Label Library, pressing the French Set Word object writing a 1 to
LW9134 will enable text to display in French. Continue for all languages configured in the Label Library.
 LW9134 is the System Tag Language Mode.
Note: Although up to 24 languages can be created in the Label Library, only eight languages can be selected and used
in a project at one time.