Maple Systems 5000HD Series - Manual (Page 68)

62 EZwarePlus Programming Manual
1010-1015, Rev. 03
data being sent to the printer.
Logger Bar: Displays the status of the EasyPrinter utility.
Options Menu
Toolbars: Provides the option of turning on and off the Standard toolbar and the View toolbar.
Status bar: Provides the option of turning on and off the Status bar at the bottom of the EasyPrinter
window.
Settings: The Settings window is used to configure the operation of EasyPrinter.
 The Output must be disabled before the Settings option is enabled.
General
Port Number of the Server Socket: Specify the IP Port number to use. This must match the Port
setting on the Printer Server tab in the EZwarePlus System Parameters dialog.
User Name: Specify a User Name. This must match the User Name setting on the Printer Server tab in
the EZwarePlus System Parameters dialog.
Password: Specify a Password. This must match the Password setting on the Printer Server tab in the
EZwarePlus System Parameters dialog.
Naming Convention for HMI Folder (when writing files): Select Use IP address to create a folder
named with the IP address of the HMI. Select Use HMI name to create a folder using the HMI name
assigned in the Data Sampling Object’s Folder name, which is used to save history data files. The
folder name is stored in LW9032-LW9039.
Prefix: Optional prefix to append to the folder name defined above. For example, if Use IP address is
selected for the naming convention, the IP address of the HMI is 192.168.1.211, and IP_ is entered in
the Prefix box, the folder will be named IP_192.168.1.211.
Minimize to System Tray: If checked, the minimized EasyPrinter utility will appear in the System Tray.
If unchecked, the utility will be minimized to the Task Bar.
Detailed Message: If checked, detailed messages will be written to the Logger window. If unchecked,
general messages will be written to the Logger window.
Hardcopy
Print Out To: When checked, specifies the printer or device to send the data to. The drop-down list
will be populated with devices available on the PC.
Save to files in: When checked, saves a *.bmp file of the screen print to the designated folder on the
computer.
Backup
Backup files in: Specifies the location on the computer to save the data file
(C:\MapleSystems\EZ5000\BackupData is the default).