Maple Systems 5000HD Series - Manual (Page 250)

244 EZwarePlus Programming Manual
1010-1015, Rev. 03
LB-9045 : memory-map communication fails (when ON)
LB-9046 : project key is different from HMI key (when ON)
LB-9047 : reboot HMI (set ON when LB9048 is on)
LB-9048 : reboot-HMI protection
LB-9049 : enable (set ON)/disable (set OFF) watch dog
LB-9050 : user logout
LB-9051 : disconnect (set OFF)/connect (set ON) EasyAccess server
LB-9052 : status of connecting to EasyAccess server
LB-9053 : prohibit password remote-read operation (when ON)
LB-9054 : prohibit password remote-write operation (when ON)
LB-9055 : MODBUS server (COM 1) receives a request (when ON)
LB-9056 : MODBUS server (COM 2) receives a request (when ON)
LB-9057 : MODBUS server (COM 3) receives a request (when ON)
LB-9058 : MODBUS server (Ethernet) receives a request (when ON)
LB-9059 : disable MACRO TRACE function (when ON)
LB-9060 : password error
LB-9061 : update password (set ON)
LB-9062 : open hardware setting dialog (set ON)
LB-9063 : disable(set ON)/enable(set OFF) popup information dialog while finding an USB disk
LB-9064 : enable USB barcode device (disable keyboard) (when ON)
LB-9065 : disable/enable COM1 broadcast station no.
LB-9066 : disable/enable COM2 broadcast station no.
LB-9067 : disable/enable COM3 broadcast station no.
LB-9068 : auto. connection for remote HMI 1 (when ON)
LB-9069 : auto. connection for remote HMI 2 (when ON)
LB-9070 : auto. connection for remote HMI 3 (when ON)
LB-9071 : auto. connection for remote HMI 4 (when ON)
LB-9072 : auto. connection for remote HMI 5 (when ON)
LB-9073 : auto. connection for remote HMI 6 (when ON)
LB-9074 : auto. connection for remote HMI 7 (when ON)
LB-9075 : auto. connection for remote HMI 8 (when ON)
LB-9100 : remote HMI 1 status (set on to retry connection)
LB-9101 : remote HMI 2 status (set on to retry connection)
LB-9102 : remote HMI 3 status (set on to retry connection)
LB-9103 : remote HMI 4 status (set on to retry connection)
LB-9104 : remote HMI 5 status (set on to retry connection)
LB-9105 : remote HMI 6 status (set on to retry connection)
LB-9106 : remote HMI 7 status (set on to retry connection)
LB-9107 : remote HMI 8 status (set on to retry connection)
LB-9149 : forced to reconnect remote HMI when IP changed on-line (set ON)
LB-9150 : auto. connection for PLC 1 (COM1) (when ON)
LB-9151 : auto. connection for PLC 2 (COM2) (when ON)
LB-9152 : auto. connection for PLC 3 (COM3) (when ON)
LB-9153 : auto. connection for PLC 4 (Ethernet) (when ON)
LB-9154 : auto. connection for PLC 5 (Ethernet) (when ON)
LB-9155 : auto. connection for PLC 6 (Ethernet) (when ON)
LB-9156 : auto. connection for PLC 7 (Ethernet) (when ON)
LB-9157 : auto. connection for PLC 8 (Ethernet) (when ON)
LB-9158 : auto. connection for PLC 9 (Ethernet) (when ON)