Maple Systems 5000HD Series - Manual (Page 65)

EZwarePlus Programming Manual 59
1010-1015, Rev. 03
3. Also, the raw data collected for Data 4 is a floating point number calculated to three decimal places.
However, we are only concerned with a two decimal accuracy, so we change the ‘Digits’ field from 3
to 2. If we want to use these same changes on other files, click the Save Setting… button to save the
changes as a conversion file (*.lgs). When opening other data log files, we can apply the same
changes by clicking on the Load Setting… button and selecting the proper conversion file.
4. Click OK to continue. The data log file is shown: